Dumps JN0-664 Discount, New JN0-664 Learning Materials

2025 Latest ITexamReview JN0-664 PDF Dumps and JN0-664 Exam Engine Free Share: https://drive.google.com/open?id=1PElTuQZrQllpFABgubC5abO4j7qBh2ht

Based on our years of experience, taking the Juniper JN0-664 exam without proper preparation is such a suicidal move. The Service Provider, Professional (JNCIP-SP) is not easy to achieve because you first need to pass the Service Provider, Professional (JNCIP-SP) JN0-664 exam. The only way to be successful with your Service Provider, Professional (JNCIP-SP) exam is by preparing it well with Juniper JN0-664 Dumps. This Service Provider, Professional (JNCIP-SP) JN0-664 exam is not even easy to go through. Most people failed it due to a lack of preparation.

The JN0-664 exam covers a wide range of topics, including OSPF, IS-IS, BGP, MPLS, VPNs, and multicast protocols. JN0-664 exam is intended for individuals who have a strong understanding of networking technologies and have experience working with Juniper Networks products. Passing the JN0-664 exam is a significant achievement for networking professionals and is recognized by employers as a valuable credential that demonstrates a high level of expertise in service provider networking.

Juniper JN0-664 Exam is a professional-level certification exam designed for individuals who want to achieve a high level of proficiency in the field of Service Provider. JN0-664 exam is also known as the JNCIP-SP exam and is one of the most respected certifications in the networking industry.

>> Dumps JN0-664 Discount <<

2025 High Pass-Rate JN0-664 – 100% Free Dumps Discount | New Service Provider, Professional (JNCIP-SP) Learning Materials

You can alter the duration and quantity of Juniper JN0-664 questions in these Juniper JN0-664 practice exams as per your training needs. For offline practice, our JN0-664 desktop practice test software is ideal. This JN0-664 software runs on Windows computers. The JN0-664 web-based practice exam is compatible with all browsers and operating systems.

Juniper Service Provider, Professional (JNCIP-SP) Sample Questions (Q58-Q63):

NEW QUESTION # 58
You are configuring anycast RP for load balancing and redundancy in your PIM-SM domain. You want to share active sources between RPs.
In this scenario, what are two solutions that will accomplish this task? (Choose two.)

A. Configure anycast PIM with the rp-set statement on each RP router.
B. Configure MSDP on each source DR router.
C. Configure MSDP on each RP router.
D. Configure anycast PIM with the rp-set statement on each source DR router.

Answer: A,C

Explanation:
In a PIM Sparse Mode (PIM-SM) domain, Anycast RP is used for load balancing and redundancy by configuring multiple RPs with the same IP address. However, for active multicast sources to be shared between RPs, an additional mechanism is needed since PIM-SM does not automatically synchronize sources between RPs.
Evaluating the Answer Choices
Option A: "Configure MSDP on each RP router." #
* Multicast Source Discovery Protocol (MSDP) is required in an Anycast RP setup to share active source information between RPs.
* MSDP allows RPs to exchange source-active (SA) messages, ensuring that multicast receivers in different regions can still receive traffic from sources registered with different RPs.
* Juniper Documentation confirms that MSDP is used to synchronize active sources across multiple RPs in an Anycast RP deployment.
* # This is a correct answer.
Option B: "Configure anycast PIM with the rp-set statement on each RP router." #
* Anycast PIM allows multiple RPs to share the same IP address, and the rp-set statement is used to define the set of Anycast RPs.
* This enables receivers and sources to register with the closest RP.
* However, Anycast PIM alone does not share active source information between RPs; MSDP is still needed for that.
* The combination of Anycast PIM (rp-set) and MSDP is the correct approach.
* # This is a correct answer.

NEW QUESTION # 59
Exhibit

CE-1 and CE-2 are part of a VPLS called Customer1 No connectivity exists between CE-1 and CE-2. In the process of troubleshooting, you notice PE-1 is not learning any routes for this VPLS from PE-2, and PE-2 is not learning any routes for this VPLS from PE-1.

A. The no-tunnel-services statement should be deleted on both PEs.
B. The route distinguisher must match on PE-1 and PE-2.
C. The instance type should be changed to I2vpn.
D. The route target must match on PE-1 and PE-2.

Answer: D

Explanation:
VPLS is a technology that provides Layer 2 VPN services over an MPLS network. VPLS uses BGP as its control protocol to exchange VPN membership information between PE routers. The route target is a BGP extended community attribute that identifies which VPN a route belongs to. The route target must match on PE routers that participate in the same VPLS instance, otherwise they will not accept or advertise routes for that VPLS.

NEW QUESTION # 60
Exhibit

Referring to the exhibit, PE-1 and PE-2 are getting route updates for VPN-B when neither of them service that VPN Which two actions would optimize this process? (Choose two.)

A. Configure the resolution rib bgp.l3vpn.0 resolution-ribs inet.0 statement on the RR.
B. Configure the family route-target statement on the RR.
C. Configure the family route-target statement on the PEs.
D. Configure the resolution rib bgp.l3vpn.0 resolution-ribs inet.0 statement on the PEs.

Answer: A,B

Explanation:
BGP route target filtering can be configured on PE devices or on route reflectors (RRs). Configuring BGP route target filtering on RRs is more efficient and scalable, as it reduces the number of BGP sessions and updates between PE devices. To configure BGP route target filtering on RRs, the following steps are required:
Configure the family route-target statement under the BGP group or neighbor configuration on the RRs. This enables the exchange of the route-target address family between the RRs and their clients (PE devices). Configure the resolution rib bgp.l3vpn.0 resolution-ribs inet.0 statement under the routing-options configuration on the RRs. This enables the RRs to resolve next hops for VPN routes using the inet.0 routing table.

NEW QUESTION # 61
Exhibit.

Referring to the exhibit; the 10.0.0.0/24 EBGP route is received on R5; however, the route is being hidden.
What are two solutions that will solve this problem? (Choose two.)

A. On R4, create a policy to change the BGP next hop to itself and apply it to IBGP as an export policy
B. On R4, create a policy to change the BGP next hop to 172.16.1.1 and apply it to IBGP as an export policy
C. Add the internal interface prefix to the BGP routing tables.
D. Add the external interface prefix to the IGP routing tables

Answer: A,D

Explanation:
Explanation
the default behavior for iBGP is to propagate EBGP-learned prefixes without changing the next-hop. This can cause issues if the next-hop is not reachable via the IGP. One solution is to use the next-hop self command on R4, which will change the next-hop attribute to its own loopback address. This way, R5 can reach the next-hop via the IGP and install the route in its routing table.
Another solution is to add the external interface prefix (120.0.4.16/30) to the IGP routing tables of R4 and R5.
This will also make the next-hop reachable via the IGP and allow R5 to use the route. According to 2, this is a possible workaround for a pure IP network, but it may not work well for an MPLS network.

NEW QUESTION # 62
Exhibit

R4 is directly connected to both RPs (R2 and R3) R4 is currently sending all ,o,ns upstream to R3 but you want all joins to go to R2 instead Referring to the exhibit, which configuration change will solve this issue?

A. Change the default route in inet.2 on R4 from R3 as the next hop to R2
B. Change the local address on R2 to be higher than R3.
C. Change the bootstrap priority on R2 to be higher than R3
D. Change the group-range to be more specific on R2 than R3.

Answer: C

Explanation:
Explanation
PIM Bootstrap Router (BSR) is a mechanism that allows PIM routers to discover and announce rendezvous point (RP) information for multicast groups. BSR uses two roles: candidate BSR and candidate RP. Candidate BSR is the router that collects information from all available RPs in the network and advertises it throughout the network. Candidate RP is the router that wants to become the RP and registers itself with the BSR. There can be only one active BSR in the network, which is elected based on the highest priority or highest IP address if the priority is the same. The BSR priority can be configured manually or assigned automatically. The default priority is 0 and the highest priority is 2551. In this question, R4 is directly connected to both RPs (R2 and R3) and is currently sending all joins upstream to R3 but we want all joins to go to R2 instead. To achieve this, we need to change the BSR priority on R2 to be higher than R3 so that R2 becomes the active BSR and advertises its RP information to R4.

NEW QUESTION # 63
......

ITexamReview is one of the most reliable platforms to get actual Juniper JN0-664 dumps. It offers the latest and valid real Service Provider, Professional (JNCIP-SP) (JN0-664) exam dumps. The product of ITexamReview is available in Juniper JN0-664 PDF, EXAM CODE desktop practice exam software, and web-based Service Provider, Professional (JNCIP-SP) (JN0-664) practice test.

New JN0-664 Learning Materials: https://www.itexamreview.com/JN0-664-exam-dumps.html

DOWNLOAD the newest ITexamReview JN0-664 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1PElTuQZrQllpFABgubC5abO4j7qBh2ht